This waterproof temperature sensor kit uses DS18B20 probe AS . It contains a probe with a resistor module. So it is easy to connect on the Arduino board. The DS18B20 temperature sensor provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface so that only one wire (and ground) needs to be connected from a central microprocessor. Compatible with 3.0-5.5V systems. If you want to make a simple water purifier, we recommend buying together with Gravity: Analog TDS Sensor/Meter for Arduino Specification Operating voltage: 3.0~ 5.5V 0.5C Accuracy from -10C to +85C Usable temperature range: -55 to 125C (-67F to +257F) 9 to 12 bit selectable resolution Uses 1-Wire interface- requires only one digital pin for communication Unique 64 bit ID burned into chip Multiple sensors can share one pin Temperature-limit alarm system Query time is less than 750ms 3 wires interface: Type A Red wire – VCC Black wire – GND Yellow wire – DATA Type B Red wire – VCC Yellow wire – GND Green wire – DATA Stainless steel tube 6mm diameter by 35mm(1.34\”) long Cable diameter: 4mm(0.16\”) Length: 90cm(35.43\”) Documents Wiki Doc Shipping List Waterproof DS18B20 Digital temperature sensor (DFR0198) x1 Terminal sensor adapter (DFR0055) x1 Digital sensor cable (FIT0011)

This waterproof temperature sensor kit uses DS18B20 probe AS . It contains a probe with a resistor module. So it is easy to connect on the Arduino board.

The DS18B20 temperature sensor provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface so that only one wire (and ground) needs to be connected from a central microprocessor. Compatible with 3.0-5.5V systems.

If you want to make a simple water purifier, we recommend buying together with Gravity: Analog TDS Sensor/Meter for Arduino

Specification

• Operating voltage: 3.0~ 5.5V
• 0.5C Accuracy from -10C to +85C
• Usable temperature range: -55 to 125C (-67F to +257F)
• 9 to 12 bit selectable resolution
• Uses 1-Wire interface- requires only one digital pin for communication
• Unique 64 bit ID burned into chip
• Multiple sensors can share one pin
• Temperature-limit alarm system
• Query time is less than 750ms
• 3 wires interface:
  • Type A
    • Red wire – VCC
    • Black wire – GND
    • Yellow wire – DATA
  • Type B
    • Red wire – VCC
    • Yellow wire – GND
    • Green wire – DATA
• Stainless steel tube 6mm diameter by 35mm(1.34″) long
• Cable diameter: 4mm(0.16″)
• Length: 90cm(35.43″)

Documents

• Wiki Doc

Shipping List

• Waterproof DS18B20 Digital temperature sensor (DFR0198) x1
• Terminal sensor adapter (DFR0055) x1
• Digital sensor cable (FIT0011)