J905931090885Gravity: Analog Turbidity Sensor For Arduino

The Arduino turbidity sensor detects water quality by measuring the level of turbidity. It is able to detect suspended particles in water by measuring the light transmittance and scattering rate which changes with the amount of total suspended solids (TSS) in water. As the TTS increases, the liquid turbidity level increases. This turbidity sensor has both analog and digital signal output modes. You can select the mode according to the MCU as the threshold is adjustable in digital signal mode. Turbidity sensors can be used in the measurement of water quality in rivers and streams, wastewater and effluent measurements, sediment transport research, and laboratory measurements. Note: The top of the probe is not waterproof! I/O Expansion Shield is NOT included Connection Example – DFRduino UNO R3 Specifications Operating Voltage: 5V DC Operating Current: 40mA (MAX) Response Time: <500ms Insulation Resistance: 100M (Min) Output Method: Analog Analog output: 0-4.5V Digital Output: High/Low level signal (you can adjust the threshold value by adjusting the potentiometer) Operating Temperature: 5C~90C Storage Temperature: -10C~90C Weight: 30g Adapter Dimensions: 38mm x 28mm x 10mm Resources Product Wiki Schematic Probe_Dimension Adapter_Dimension Datasheet Package Contents 1x Turbidity sensor adapter 1x Turbidity sensor probe 1x Turbidity sensor cable 1x Gravity analog sensor cable