A genuine Maxim sourced DS18B20+ One Wire Digital Temperature Sensor. The DS18B20+ is the perfect low-cost solution for a range of Raspberry Pi and Arduino temperature control and data-logging projects! The DS18B20+ measures temperature in degrees Celsius with 9 to 12-bit precision and includes an alarm function with nonvolatile user-programmable upper and lower trigger points. Sensing range is -55C to 125C (accurate to 0.5C over the range of -10C to +85C), and each sensor has a unique 64-bit serial number hard-programmed enabling the use of a number of sensors on a single data bus. The DS18B20 communicates over a 1-Wire bus that by definition requires only one data line (and ground) for communication with a central microprocessor, and can be powered on the Raspberry Pi\’s 3.3V power line.Note: Image is a representation and may show another brand, however we only ship authentic Maxim sensors. The DS18B20+ Features Unique 1-Wire Interface Requires Only One Port Pin for Communication Each Device has a Unique 64-Bit Serial Code Stored in an On-Board ROM Requires No External Components Can Be Powered from Data Line; Power Supply Range is 3.0V to 5.5V Measures Temperatures from -55C to +125C (-67F to +257F) 0.5C Accuracy from -10C to +85C Thermometer Resolution is User Selectable from 9 to 12 Bits Converts Temperature to 12-Bit Digital Word in 750ms (Max) User-Definable Nonvolatile (NV) Alarm Settings Alarm Search Command Identifies and Addresses Devices Whose Temperature is Outside Programmed Limits (Temperature Alarm Condition) TO-92 Package Layout Software Compatible with the DS1822 Tutorials The DS18B20+ One Wire Digital Temperature Sensor and the Raspberry Pi

J905931089245DS18B20+ One Wire Digital Temperature Sensor