The SparkFun Qwiic TMP117 breakout is a high precision temperature sensor equipped with an I2C interface. It outputs temperature readings with high precision of 0.1C across the temperature range of -20C to +50Cs with no calibration and a maximum range from -55C to 150C. The SparkFun High Precision Temperature Sensor also has a very low power consumption rate which minimizes the impact of self-heating on measurement accuracy. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1″-spaced pins in case you prefer to use a breadboard.

The SparkFun High Precision Temperature Sensor also includes programmable temperature limits and digital offset for system correction. While the TMP102 is capable of reading temperatures to a resolution of 0.0625C and is accurate up to 0.5C, the onboard TMP117 is not only more precise but has a 16-bit resolution of 0.0078C!

To make this breakout even easier to use, we’ve written an Arduino library to help you get started “Qwiic-ly.” Check the Documents tab above for more information.

Get Started with the Sparkfun High Precision TMP117 Hookup Guide

Features

• Uses I2C interface (Qwiic-enabled)
• Four selectable addresses
  • 0x48 (default), 0x49, 0x4A, 0x4B
• 16-bit resolution, 0.0078C
• High accuracy, digital temperature sensor
  • 0.1C (max) from 20C to 50C
  • 0.15C (max) from 40C to 70C
  • 0.2C (max) from 40C to 100C
  • 0.25C (max) from 55C to 125C
  • 0.3C (max) from 55C to 150C
• Operating temperature range
  • -55C to +150C
• Operating voltage range
  • 1.8V to 5.5V
  • Typically 3.3V if using the Qwiic cable
• Low power consumption
  • 3.5A (1-Hz conversion cycle)
  • 150nA (shutdown current)
• Programmable operating modes
  • Continuous, one-shot, and shutdown
• Programmable temperature alert limits
• Selectable averaging for reduced noise
• Digital offset for system correction
• NIST traceability

Resources

• Schematic
• Eagle Files
• Board Dimensions
• Hookup Guide
• Datasheet (TMP117)
• Arduino Library
• GitHub Hardware Repo